#include <arch/arm/atmel/at91_tc.h>
#include <arch/arm/atmel/at91_pwmc.h>
#include <arch/arm/atmel/at91_us.h>
#include <arch/arm/atmel/at91_dbgu.h>
#include <arch/arm/atmel/at91_spi.h>
#include <arch/arm/atmel/at91_aic.h>
#include <arch/arm/atmel/at91_pio.h>
#include <arch/arm/atmel/at91_pmc.h>
#include <arch/arm/atmel/at91_rstc.h>
#include <arch/arm/atmel/at91_wdt.h>
#include <arch/arm/atmel/at91_pit.h>
#include <arch/arm/atmel/at91_mc.h>
#include <arch/arm/atmel/at91_ssc.h>
#include <arch/arm/atmel/at91_twi.h>
#include <arch/arm/atmel/at91_adc.h>

Include dependency graph for at91sam7s.h:

Defines
#define	FLASH_BASE 0x100000UL
#define	RAM_BASE 0x200000UL
#define	TC_BASE 0xFFFA0000
	Timer/counter base address.
#define	UDP_BASE 0xFFFB0000
	USB device port base address.
#define	TWI_BASE 0xFFFB8000
	Two-wire interface base address.
#define	USART0_BASE 0xFFFC0000
	USART 0 base address.
#define	USART1_BASE 0xFFFC4000
	USART 1 base address.
#define	PWMC_BASE 0xFFFCC000
	PWM controller base address.
#define	SSC_BASE 0xFFFD4000
	Serial synchronous controller base address.
#define	ADC_BASE 0xFFFD8000
	ADC base address.
#define	SPI0_BASE 0xFFFE0000
	SPI0 base address.
#define	AIC_BASE 0xFFFFF000
	AIC base address.
#define	DBGU_BASE 0xFFFFF200
	DBGU base address.
#define	PIOA_BASE 0xFFFFF400
	PIO A base address.
#define	PMC_BASE 0xFFFFFC00
	PMC base address.
#define	RSTC_BASE 0xFFFFFD00
	Resect controller register base address.
#define	RTT_BASE 0xFFFFFD20
	Realtime timer base address.
#define	PIT_BASE 0xFFFFFD30
	Periodic interval timer base address.
#define	WDT_BASE 0xFFFFFD40
	Watch Dog register base address.
#define	VREG_BASE 0xFFFFFD60
	Voltage regulator mode controller base address.
#define	MC_BASE 0xFFFFFF00
	Memory controller base.
#define	PERIPH_RPR_OFF 0x00000100
	Receive pointer register offset.
#define	PERIPH_RCR_OFF 0x00000104
	Receive counter register offset.
#define	PERIPH_TPR_OFF 0x00000108
	Transmit pointer register offset.
#define	PERIPH_TCR_OFF 0x0000010C
	Transmit counter register offset.
#define	PERIPH_RNPR_OFF 0x00000110
	Receive next pointer register offset.
#define	PERIPH_RNCR_OFF 0x00000114
	Receive next counter register offset.
#define	PERIPH_TNPR_OFF 0x00000118
	Transmit next pointer register offset.
#define	PERIPH_TNCR_OFF 0x0000011C
	Transmit next counter register offset.
#define	PERIPH_PTCR_OFF 0x00000120
	PDC transfer control register offset.
#define	PERIPH_PTSR_OFF 0x00000124
	PDC transfer status register offset.
#define	PDC_RXTEN 0x00000001
	Receiver transfer enable.
#define	PDC_RXTDIS 0x00000002
	Receiver transfer disable.
#define	PDC_TXTEN 0x00000100
	Transmitter transfer enable.
#define	PDC_TXTDIS 0x00000200
	Transmitter transfer disable.
#define	DBGU_HAS_PDC
#define	SPI_HAS_PDC
#define	SSC_HAS_PDC
#define	USART_HAS_PDC
#define	USART_HAS_MODE
#define	PIO_HAS_MULTIDRIVER
#define	PIO_HAS_PULLUP
#define	PIO_HAS_PERIPHERALSELECT
#define	PIO_HAS_OUTPUTWRITEENABLE
Peripheral Identifiers and Interrupts
#define	FIQ_ID 0
	Fast interrupt ID.
#define	SYSC_ID 1
	System interrupt ID.
#define	PIOA_ID 2
	Parallel I/O controller ID.
#define	ADC_ID 4
	Analog to digital converter ID.
#define	SPI0_ID 5
	Serial peripheral interface 0 ID.
#define	US0_ID 6
	USART 0 ID.
#define	US1_ID 7
	USART 1 ID.
#define	SSC_ID 8
	Synchronous serial controller ID.
#define	TWI_ID 9
	Two-wire interface ID.
#define	PWMC_ID 10
	PWM controller ID.
#define	UDP_ID 11
	USB device port ID.
#define	TC0_ID 12
	Timer 0 ID.
#define	TC1_ID 13
	Timer 1 ID.
#define	TC2_ID 14
	Timer 2 ID.
#define	IRQ0_ID 30
	External interrupt 0 ID.
#define	IRQ1_ID 31
	External interrupt 1 ID.
Historical SPI0 Peripheral Multiplexing Names
#define	SPI0_NPCS0_PA11A 11
	Port bit number on PIO-A Perpheral A.
#define	SPI0_NPCS1_PA09B 9
	Port bit number on PIO-A Perpheral B.
#define	SPI0_NPCS1_PA31A 31
	Port bit number on PIO-A Perpheral A.
#define	SPI0_NPCS2_PA10B 10
	Port bit number on PIO-A Perpheral B.
#define	SPI0_NPCS2_PA30B 30
	Port bit number on PIO-A Perpheral B.
#define	SPI0_NPCS3_PA03B 3
	Port bit number on PIO-A Perpheral B.
#define	SPI0_NPCS3_PA05B 5
	Port bit number on PIO-A Perpheral B.
#define	SPI0_NPCS3_PA22B 22
	Port bit number on PIO-A Perpheral B.
#define	SPI0_MISO_PA12A 12
	Port bit number on PIO-A Perpheral A.
#define	SPI0_MOSI_PA13A 13
	Port bit number on PIO-A Perpheral A.
#define	SPI0_SPCK_PA14A 14
	Port bit number on PIO-A Perpheral A.
USART Peripheral Multiplexing
#define	PA5_RXD0_A 5
#define	PA6_TXD0_A 6
#define	PA2_SCK0_B 2
#define	PA7_RTS0_A 7
#define	PA8_CTS0_A 8
#define	PA21_RXD1_A 21
#define	PA22_TXD1_A 22
#define	PA23_SCK1_A 23
#define	PA24_RTS1_A 24
#define	PA25_CTS1_A 25
#define	PB26_DCD1_A 26
#define	PB28_DSR1_A 28
#define	PB27_DTR1_A 27
#define	PB29_RI1_A 29
SPI Peripheral Multiplexing
#define	PA12_SPI0_MISO_A 12
#define	PA13_SPI0_MOSI_A 13
#define	PA14_SPI0_SPCK_A 14
#define	PA11_SPI0_NPCS0_A 11
#define	PA9_SPI0_NPCS1_B 9
#define	PA31_SPI0_NPCS1_A 31
#define	PA10_SPI0_NPCS2_B 10
#define	PB30_SPI0_NPCS2_B 30
#define	PA3_SPI0_NPCS3_B 3
#define	PA5_SPI0_NPCS3_B 5
#define	PA22_SPI0_NPCS3_B 22
#define	SPI0_PINS _BV(PA12_SPI0_MISO_A) \| _BV(PA13_SPI0_MOSI_A) \| _BV(PA14_SPI0_SPCK_A)
#define	SPI0_PIO_BASE PIOA_BASE
#define	SPI0_PSR_OFF PIO_ASR_OFF
#define	SPI0_CS0_PIN _BV(PA11_SPI0_NPCS0_A)
#define	SPI0_CS0_PIO_BASE PIOA_BASE
#define	SPI0_CS0_PSR_OFF PIO_ASR_OFF
#define	SPI0_CS1_PIN _BV(PA9_SPI0_NPCS1_B)
#define	SPI0_CS1_PIO_BASE PIOA_BASE
#define	SPI0_CS1_PSR_OFF PIO_ASR_OFF
#define	SPI0_CS2_PIN _BV(PA10_SPI0_NPCS2_B)
#define	SPI0_CS2_PIO_BASE PIOA_BASE
#define	SPI0_CS2_PSR_OFF PIO_ASR_OFF
#define	SPI0_CS3_PIN _BV(PA3_SPI0_NPCS3_B)
#define	SPI0_CS3_PIO_BASE PIOA_BASE
#define	SPI0_CS3_PSR_OFF PIO_ASR_OFF
Debug Unit Peripheral Multiplexing
#define	PA9_DRXD_A 9
#define	PA10_DTXD_A 10
Synchronous Serial Controller Peripheral Multiplexing
#define	PA17_TD_A 17
	Transmit data pin.
#define	PA18_RD_A 18
	Receive data pin.
#define	PA16_TK_A 16
	Transmit clock pin.
#define	PA19_RK_A 19
	Receive clock pin.
#define	PA15_TF_A 15
	Transmit frame sync. pin.
#define	PA20_RF_A 20
	Receive frame sync. pin.
Two Wire Interface Peripheral Multiplexing
#define	PA3_TWD_A 3
	Two wire serial data pin.
#define	PA4_TWCK_A 4
	Two wire serial clock pin.
Timer/Counter Peripheral Multiplexing
#define	PA0_TIOA0_B 0
#define	PA1_TIOB0_B 1
#define	PA4_TCLK0_B 4
#define	PA15_TIOA1_B 15
#define	PA16_TIOB1_B 16
#define	PA28_TCLK1_B 28
#define	PA26_TIOA2_B 26
#define	PA27_TIOB2_B 27
#define	PA29_TCLK2_B 29
Clocks, Oscillators and PLLs Peripheral Multiplexing
#define	PA6_PCK0_B 6
#define	PA17_PCK1_B 17
#define	PA21_PCK1_B 21
#define	PA18_PCK2_B 18
#define	PA31_PCK2_B 31
Advanced Interrupt Controller Peripheral Multiplexing
#define	PA19_FIQ_B 19
#define	PA20_IRQ0_B 20
#define	PA30_IRQ1_A 30
ADC Interface Peripheral Multiplexing
#define	PA8_ADTRG_B 8
	ADC trigger pin.
PWM Peripheral Multiplexing
#define	PA0_PWM0_A 0
#define	PA23_PWM0_B 23
#define	PA1_PWM1_A 1
#define	PA24_PWM1_B 24
#define	PA2_PWM2_A 2
#define	PA13_PWM2_B 13
#define	PA25_PWM2_B 25
#define	PA7_PWM3_B 7
#define	PA14_PWM3_B 14

Define Documentation

#define FLASH_BASE 0x100000UL

#define RAM_BASE 0x200000UL

#define TC_BASE 0xFFFA0000

Timer/counter base address.

#define UDP_BASE 0xFFFB0000

USB device port base address.

#define TWI_BASE 0xFFFB8000

Two-wire interface base address.

#define USART0_BASE 0xFFFC0000

USART 0 base address.

#define USART1_BASE 0xFFFC4000

USART 1 base address.

Referenced by AhdlcAt91Init(), AhdlcAt91IOCtl(), AhdlcAt91Open(), and USART_Init().

#define PWMC_BASE 0xFFFCC000

PWM controller base address.

#define SSC_BASE 0xFFFD4000

Serial synchronous controller base address.

#define ADC_BASE 0xFFFD8000

ADC base address.

#define SPI0_BASE 0xFFFE0000

SPI0 base address.

Referenced by At91Spi0Init(), At91SpiInit(), At91SpiInitChipSelects(), At91SpiTransfer2(), Avr32Spi0Init(), and ShowHardwareConfiguration().

#define AIC_BASE 0xFFFFF000

AIC base address.

#define DBGU_BASE 0xFFFFF200

DBGU base address.

#define PIOA_BASE 0xFFFFF400

PIO A base address.

#define PMC_BASE 0xFFFFFC00

PMC base address.

#define RSTC_BASE 0xFFFFFD00

Resect controller register base address.

#define RTT_BASE 0xFFFFFD20

Realtime timer base address.

#define PIT_BASE 0xFFFFFD30

Periodic interval timer base address.

#define WDT_BASE 0xFFFFFD40

Watch Dog register base address.

#define VREG_BASE 0xFFFFFD60

Voltage regulator mode controller base address.

#define MC_BASE 0xFFFFFF00

Memory controller base.

#define PERIPH_RPR_OFF 0x00000100

Receive pointer register offset.

Referenced by AhdlcAt91Init(), and At91SpiTransfer2().

#define PERIPH_RCR_OFF 0x00000104

Receive counter register offset.

Referenced by AhdlcAt91Init(), and At91SpiTransfer2().

#define PERIPH_TPR_OFF 0x00000108

Transmit pointer register offset.

Referenced by At91SpiTransfer2().

#define PERIPH_TCR_OFF 0x0000010C

Transmit counter register offset.

Referenced by At91SpiTransfer2().

#define PERIPH_RNPR_OFF 0x00000110

Receive next pointer register offset.

Referenced by AhdlcAt91Init(), and At91SpiTransfer2().

#define PERIPH_RNCR_OFF 0x00000114

Receive next counter register offset.

Referenced by AhdlcAt91Init(), and At91SpiTransfer2().

#define PERIPH_TNPR_OFF 0x00000118

Transmit next pointer register offset.

Referenced by At91SpiTransfer2().

#define PERIPH_TNCR_OFF 0x0000011C

Transmit next counter register offset.

Referenced by At91SpiTransfer2().

#define PERIPH_PTCR_OFF 0x00000120

PDC transfer control register offset.

Referenced by AhdlcAt91Init(), AhdlcAt91Open(), and At91SpiTransfer2().

#define PERIPH_PTSR_OFF 0x00000124

PDC transfer status register offset.

#define PDC_RXTEN 0x00000001

Receiver transfer enable.

Referenced by AhdlcAt91Open(), and At91SpiTransfer2().

#define PDC_RXTDIS 0x00000002

Receiver transfer disable.

Referenced by AhdlcAt91Init(), and At91SpiTransfer2().

#define PDC_TXTEN 0x00000100

Transmitter transfer enable.

Referenced by At91SpiTransfer2().

#define PDC_TXTDIS 0x00000200

Transmitter transfer disable.

Referenced by At91SpiTransfer2().

#define DBGU_HAS_PDC

#define SPI_HAS_PDC

#define SSC_HAS_PDC

#define USART_HAS_PDC

#define USART_HAS_MODE

#define PIO_HAS_MULTIDRIVER

#define PIO_HAS_PULLUP

#define PIO_HAS_PERIPHERALSELECT

#define PIO_HAS_OUTPUTWRITEENABLE

Defines

Peripheral Identifiers and Interrupts

Historical SPI0 Peripheral Multiplexing Names

USART Peripheral Multiplexing

SPI Peripheral Multiplexing

Debug Unit Peripheral Multiplexing

Synchronous Serial Controller Peripheral Multiplexing

Two Wire Interface Peripheral Multiplexing

Timer/Counter Peripheral Multiplexing

Clocks, Oscillators and PLLs Peripheral Multiplexing

Advanced Interrupt Controller Peripheral Multiplexing

ADC Interface Peripheral Multiplexing

PWM Peripheral Multiplexing

Define Documentation